Transmission, Lift & PTO


Here you have our selection of powertrain and rear axle parts for the Massey Ferguson 500 series. The range includes vital components for the rear axle of your MF 500, including inner bearings, final drive bearings, shrink rings as well as both internal and external oil seals. You will also find bearing housings for the gearbox's lower shaft.

For mounting and fastening we stock specific rear wheel bolts (9/16′′ UNF), rear axle bolts (7/16′′×2′′ UNF) as well as various UNF and UNC bolt sets. In addition, we offer brake cleaner spray for workshop use. If you have questions about the transmission or hydraulics of your vintage tractor, we are ready by email or phone.

Price  
-
OK
Previous page    Page 1 / 4   
12-tooth clutch with PTO hub
€ 348,00
Add to basket
Allen plug 3/8" for hydraulic cover -FE35 - MF35 - MF65 - MF135 - Landini 12431131, 195567M1, 356032X1, 10650594, 365332X1 Massey Ferguson 195567M1, 365332X1, 356032X1, 365572X1, 378474X1, 356031X1, 355547X1, 353706X1, 353756X1, 825031M1, 825031M2,
Allen plug for hydraulic cover
€ 2,10
Add to basket
Ball pin for trailer - 22mm x 185mm - 1250kg Ball size: 50mm A Ø22mm (7/8'') B: 100mm C: 85mm Surface: Zinc Plated.
Ball bolt 22mm x 185mm (B+C) 1250kg
€ 26,50
Add to basket
Tow ball for trailer - 32x 185mm - 3000 kg Ball size: 50mm A Ø32mm (1-1/4'') B: 100mm C: 85mm Surface: Zinc Plated
Ball pin for trailer - 32x 185mm - 3000 kg
€ 26,20
Add to basket
Bearing housing for input shaft - MF135 - MF550 - MF565 - MF575 - MF590 - MF165 - MF168 - MF185 - MF188 -Landini 1693833M91, 1693833K92, 1693833M92, 1860890M91, 964903M91, 1860890M92 Massey Ferguson 964903M91, 1860876M1, 1860890M92, 1860890M91, 1693333M92
Landini 1693833M91, 1693833K92, 1693833M92, 1860890M91, 964903M91, 1860890M92 Massey Ferguson 964903M91, 1860876M1, 1860890M92, 1860890M91, 1693333M92, 1693833M92, 1693833M91
Bearing housing for input shaft
€ 66,30
Add to basket
Bearing housing for input shaft ONLY for models with MultiPower Fits: MF135, MF148, MF165, MF168, MF185, MF188 Fits: MF230, MF235, MF240, MF245, MF250, MF265, MF270, MF275, MF282, MF285, MF290, MF298 Fits: MF550, MF565, MF575, MF590 Fits p
Bearing housing for input shaft - Multipower models
€ 93,50
Add to basket
Bolt UNF 3/8" x 7/8" - 5 pcs. (fig. 12 in the picture) Thread: 3/8" UNF Length: 7/8" Strength: 8.8 Fits on: MF230, MF240, MF253, MF265, MF275, MF290, MF298 Fits on: MF340, MF342, MF350, MF352, MF355, MF360, MF362, MF365, MF372, MF375, MF382, MF390,
Bolt UNF 3/8" x 7/8" - 5 pcs.
€ 6,10
Add to basket
-31%
Brake cleaner spray 450 ml.
€ 3,70
€ 2,54
Add to basket
Clutch - 12t / 10t PTO hub - 25 spline
€ 348,00
Add to basket
Clutch - Fork for release bearing - Bolt (fig. 14 in the picture) Fits: MF35, MF65 Fits: MF135, MF148, MF155, MF158, MF165, MF168, MF175, MF178, MF185, MF188 Fits: MF230, MF240, MF253, MF265, MF275, MF290, MF298 Fits: MF1200 OEM ref.
Clutch - Fork for release bearing - Bolt
€ 8,70
Add to basket
Clutch - Housing for release bearing - Ø56mm
€ 17,40
Add to basket
Clutch release bearing for double clutch - MF135 - FE35, MF35, MF65 - Bearing references CT1310ARSE, NICN1585 Case IH / International Harvester 86534551, D8NN7580BA, E4NN7580AA, NDA7580B, 83933520, 83914221, 83914247, 83946908, D8NN7580AA, D8NN7580BB, 818
Clutch - Release bearing for dual clutch
€ 25,30
Add to basket
Clutch 12" / 10" double clutch with PTO hub 25 spline 6 red springs Ø: PTO hub 10" / 230mm. - 25 spline Fits: MF135 Fits: MF230, MF240, MF250 Fits: MF340, MF350 Fits: MF550 Check dimensions/splines on your old clutch before be
Clutch 12-tooth with PTO hub
€ 368,00
Add to basket
Clutch hub - drive hub 10" / 254 mm - 25 spline Fits: MF135 with serial number after 439192 Fits: MF148 with serial number after 605135 Fits: MF152, MF155, MF158 Fits: MF165 with serial number 130774 Fits: MF168 with serial number after 255119 Pa
Clutch hub - Drive hub - 10t / 25 spline
€ 64,50
Add to basket
Clutch hub - Drive hub - 12t / 10 spline
€ 65,60
Add to basket
Clutch hub - Drive hub - 12t / 25 spline
€ 167,30
Add to basket
Clutch inspection plate
€ 10,60
Add to basket
Clutch inspection plate - Bolt set - 4 pcs.
€ 6,30
Add to basket
Clutch mandrel - MF - Professional type
€ 77,00
Add to basket
Clutch mandrel 10/10 spline
€ 32,80
Add to basket
Clutch pilot bearing for flywheel
€ 5,00
Add to basket
Coupling mandrel 10/25 spline
€ 26,50
Add to basket
Crown / Pinion - Bearing Forreste (fig. 6 in picture) Mål: Indv. Ø44.45mm Udv.: 95.25mm Bredde: 30.963mm Passer på: MF35 Passer på: MF135, MF140, MF145, MF148, MF152, MF155, MF158, MF165, MF168, MF175, MF178, MF185, MF188 Passer på: MF230, MF231,
Crown / Pinion - Bearing - Front
€ 47,00
Add to basket
Crown / Pinion - Bearing Rear Dimensions: Inner: 44.45mm Outer: 95.25mm Width: 30.963mm (fig. 7 in picture) Fits: FE35, MF35, MF65 Fits: MF135, MF140, MF145, MF148, MF152, MF155, MF158, MF165, MF168, MF175, MF178, MF185, MF188 Fits: MF
Crown / Pinion - Bearing - Rear
€ 30,00
Add to basket
Crown / Pinion wheel - Bolts - 12 pcs. (fig. 2 in picture) Fits: TEA20, TED20, TEF20 Fits: FE35, MF35, MF65 Fits: MF135, MF140, MF145, MF148, MF152, MF158, MF165, MF175, MF178, MF185, MF188 Fits: MF230, MF240, MF250, MF265, MF275, MF2
Crown / Pinion - Bolts - 12 pcs.
€ 28,20
Add to basket
Crown / Pinion - Nut - 12 pcs. (fig. 3 in picture) Fits: TEA20, TED20, TEF20 Fits: FE35, MF35, MF65 Fits: MF135, MF140, MF145, MF148, MF152, MF158, MF165, MF175, MF178, MF185, MF188 Fits: MF230, MF240, MF250, MF265, MF275, MF
Crown / Pinion - Nut - 12 pcs.
€ 9,00
Add to basket
Differential - Bearing (Fig. 4 & 5 in the picture) Dimensions: 66.67 x 112.7 x 30.05 mm Used on the left and right sides on some models, check dimensions before ordering. Fits: TE20, TEA20, TED20, TEF20, TO20 Fits: FE35. MF35, MF65 Fits: MF135, MF
Differential - Bearing
€ 35,50
Add to basket
Differential bearing Dimensions: Inner: Ø107.95mm Outer: Ø158.75mm Width: 23.02mm Fits models with differential lock. Fits: Fordson Dexta, Super Dexta Fits: Ford 2000, 3000, 4000, 5000, 7000 OEM ref. Bearing reference 37425/37625 Case IH / I
Differential bearing
€ 48,00
Add to basket
Differential lock pawl - MF35 - MF135 - MF550 - Massey Ferguson 897036M1, 897 036M1
Differential lock claw
€ 102,40
Add to basket
Differential lock - Axle (fig. 3 in the picture) Fits: MF165, MF168, MF185, MF188 Fits: MF240, MF245, MF250, MF255, MF261, MF265, MF270, MF275, MF282, MF290, MF298 Fits: MF560, MF565, MF575, MF590 Fits: MF670, MF675, MF690, MF698, M
Differential locks - Axle
€ 39,50
Add to basket
Drawbar cat 1
Drawbar Cat. 1 - 765 mm
€ 52,90
Add to basket
Drawbar Cat 2
Drawbar cat. 2 / 781 mm
€ 65,50
Add to basket
Drawbar Cat. 2 Holes: 11 - Ø 20 mm Total length: 781 mm Fits: MF65, MF135, MF165 - MF188 Fits: MF240, MF265, MF275 Fits: MF550, MF565, MF575 Fits: Fordson Major, Power Major, Super Major Fits: Ford 4000, 5000, 7000 OEM ref.
Drawbar cat. 2 / 781 mm
€ 63,60
Add to basket
Drawbar with A-frame (Cat. 2)
Drawbar with A-frame (Cat. 2)
€ 132,40
Add to basket
Freeze plug - 44.45 mm - Lift spindle gear housing - Cover
€ 2,60
Add to basket
Rear axle housing gasket Fits: TE20 series from chassis no. 325000 Fits: FE35, MF35, MF65, MF135, MF165, MF168, MF175, MF178, MF185, MF188 Fits: MF230, MF240 Fits: MF340 Fits: MF550 OEM ref. Massey Ferguson 183254P1, 183254M1, 1832
gasket rear axle thigh
€ 3,80
Add to basket
Gear lever locking pin (fig. 9 in the picture) Fits: TE20 series Fits: FE35, MF35, MF65, MF135, MF165 - MF188 Fits: MF230, MF240, MF250, MF260 Fits: MF340, MF355, MF350, MF365, MF375, MF390 Fits: MF595 OEM ref. S41552, S.41552, 1
Gear lever locking pin
€ 2,70
Add to basket
Gear lever seat ring (fig. 11 in the picture) Fits: FE35, MF35, MF65, MF135, MF165 - MF188 Fits: MF230, MF240, MF250, MF265, MF275, MF285, MF290 Fits: MF550, MF565, MF575, MF590, MF595 OEM ref. Landini 180583M1, 1861024M1 Massey Ferguson 18
Gear lever seat ring
€ 3,90
Add to basket
Gear lever spring (fig. 10 in the picture) Fits: FE35, MF35, MF65, MF135, MF165 - MF188 Fits: MF230, MF240, MF250, MF260, MF265, MF275, MF285, MF290 Fits: MF350, MF352, MF362, MF365, MF372, MF375, MF382, MF390 Fits: MF550, MF560, MF56
gear lever spring
€ 2,60
Add to basket
Gearbox gasket
€ 7,50
Add to basket
Grease cartridge Lubricating grease 400 grams
€ 3,40
Add to basket
Grease nipples 1/4" UNF - 1/8" BSP - assortment - MF tractor - Ford tractor - Ferguson tractor
Grease nipples - assortment
€ 29,30
Add to basket
Grease nipples 1/4" UNF - 5 pcs.
€ 3,90
Add to basket
Gyro valve - Bracket for quick coupling Fits quick coupling with Ø38mm (1/2" body)
Gyro valve - Bracket for quick coupling
€ 5,30
Add to basket
Gyro valve - Bracket for quick coupling - Double Fits quick coupling with ø38mm (1/2" body)
Gyro valve - Bracket for quick coupling - Double
€ 10,10
Add to basket
High gear shaft - bearing Dimensions: Outer: Ø80mm Inner: Ø40mm Width: 18mm Fits: MF35, MF65, MF135, MF165- MF188 Fits: MF230, MF240, MF245, MF250, MF260, MF265, MF275, MF285, MF290 Fits: MF550, MF560, MF55, MF575, MF590, MF595 Fits: MF675
High gear shaft - bearing
€ 29,40
Add to basket
High gear shaft - Multi Power model (fig. 12 in picture) 32 spline x 24 spline x 10 spline Fits: MF133, MF135, MF155, MF158, MF168, MF175, MF178, MF188 Fits: MF165 after serial no. 114352 Fits: MF185 after serial no. 308909 Fits: MF25
High-gear shaft - Multi Power model
€ 141,00
Add to basket
Hinge bolt - Hinge pin - 3-point mounting (fig. 19 in picture) Fits: FE35, MF35, MF65 Fits: MF135, MF148, MF152, MF155, MF158, MF165, MF168, MF175, MF178, MF185, MF188 Fits: MF230, MF231, MF235, MF240, MF243, MF245, MF250, MF253, MF255, MF2
Hinge bolt - Hinge pin- 3 point mounting - Ø3/4"
€ 15,40
Add to basket
Hydraulic 1/2" quick coupling - Dust cap - Blue
Hydraulic 1/2" quick coupling - Dust cap - Blue
€ 3,00
Add to basket
Hydraulic 1/2" quick coupling - Dust cap - Red
Hydraulic 1/2" quick coupling - Dust cap - Red
€ 2,60
Add to basket
Previous page    Page 1 / 4