Transmission, Lift & PTO


Here you will find our range of transmission and rear-axle parts for the Ford 3000 tractor. The selection includes mechanical wear parts such as rear wheel bearings, differential bearings as well as inner and outer oil seals (including for the differential lock). For sealing we carry gasket sets for gearbox/rear axle as well as specific gearbox cover gaskets.

The range also includes gear knobs (Ø41 mm), rim plate bolts as well as rear wheel bolts and rear wheel nuts (5/8′′ UNF). If you have questions about which spare part you need for your Ford 3000, we are available by email or telephone to help you further.

Price  
-
OK
Previous page    Page 1 / 2   
Ball pin for trailer - 22mm x 185mm - 1250kg Ball size: 50mm A Ø22mm (7/8'') B: 100mm C: 85mm Surface: Zinc Plated.
Ball bolt 22mm x 185mm (B+C) 1250kg
€ 26,50
Add to basket
Ball bolt for trailer - 19x 43mm
Ball bolt for trailer - 19x 43mm
€ 20,00
Add to basket
Ball pin for trailer - 19x 70 mm - 500 kg
Ball pin for trailer - 19x 70mm - 500 kg
€ 21,30
Add to basket
Tow ball for trailer - 32x 185mm - 3000 kg Ball size: 50mm A Ø32mm (1-1/4'') B: 100mm C: 85mm Surface: Zinc Plated
Ball pin for trailer - 32x 185mm - 3000 kg
€ 26,20
Add to basket
-31%
Brake cleaner spray 450 ml.
€ 3,70
€ 2,54
Add to basket
Clutch release bearing for double clutch - MF135 - FE35, MF35, MF65 - Bearing references CT1310ARSE, NICN1585 Case IH / International Harvester 86534551, D8NN7580BA, E4NN7580AA, NDA7580B, 83933520, 83914221, 83914247, 83946908, D8NN7580AA, D8NN7580BB, 818
Clutch - Release bearing for dual clutch
€ 25,30
Add to basket
Clutch 11t/ 280mm
€ 133,60
Add to basket
Clutch 13t / 330mm / 29 Spline / Ford 4000
€ 266,20
Add to basket
Clutch hub - Drive hub - 11t / 10 spline
€ 63,60
Add to basket
Clutch hub - drive hub 11" / 280mm - 15 spline Fits: Ford 2000, 3000, 4000 Fits: Ford 2100, 2110, 2300, 2310, 2600, 2610, 2810, 2910, 3055, 3100, 3400, 3500, 3550, 3600, 3610, 3910, 4100, 4140, 4500, 4600, 4610 Fits: Ford 4100 (up to 6/1
Clutch hub - Drive hub - 11t / 15 spline
€ 50,20
Add to basket
Clutch hub - Drive hub - 13T / 10 Spline
€ 80,20
Add to basket
Clutch hub - drive hub 13"/330mm - 10 spline Fits: Ford 3000, 4000 Fits: Ford 2610, 2810, 2910, 3230, 3400, 3430, 3500, 3550, 3610, 3910, 3930, 4100, 4110, 4130, 4450, 4610, 4630, 4830, 5030 OEM ref. Case IH / International Harvester 8200601
Clutch hub - Drive hub - 13t / 10 spline
€ 66,80
Add to basket
Clutch pedal - Cross-shaft bushing Dimensions: A: 19mm B: 31.9mm C: 1.7mm Fits: Ford 2000, 3000, 4000, 5000 Fits: Ford 2600, 3600, 4100, 4600, 5600, 6600, 7600 Fits: Ford 2610, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 7610 OEM ref. For
Clutch pedal - Cross shaft bushing - Ford tractor
€ 8,70
Add to basket
Landini 1321 Massey Ferguson 1321, 180802M1, 184592M1, 184 592M1 Vandervell B.4890 - Clutch pedal shaft bushing 1 pc. -Fits: TE20, FE35,MF35, MF35, MF65, MF135, MF165, MF168, MF175, MF178, MF185, MF188 Fits: MF230, MF240, MF250, MF265, MF275,
Clutch pedal shaft bushing 1 piece.
€ 3,90
Add to basket
Clutch pedal spring
€ 6,10
Add to basket
Clutch pilot bearing for flywheel
€ 5,00
Add to basket
Clutch U/ Clutch plate - Single clutch - Ford tractor
€ 231,00
Add to basket
Clutch with PTO coupling plate
€ 468,00
Add to basket
Differential bearing Dimensions: Inner: Ø107.95mm Outer: Ø158.75mm Width: 23.02mm Fits models with differential lock. Fits: Fordson Dexta, Super Dexta Fits: Ford 2000, 3000, 4000, 5000, 7000 OEM ref. Bearing reference 37425/37625 Case IH / I
Differential bearing
€ 48,00
Add to basket
Drawbar Cat. 2 Holes: 11 - Ø 20 mm Total length: 781 mm Fits: MF65, MF135, MF165 - MF188 Fits: MF240, MF265, MF275 Fits: MF550, MF565, MF575 Fits: Fordson Major, Power Major, Super Major Fits: Ford 4000, 5000, 7000 OEM ref.
Drawbar cat. 2 / 781 mm
€ 63,60
Add to basket
Drawbar with A-frame (Cat. 2)
Drawbar with A-frame (Cat. 2)
€ 132,40
Add to basket
Gear knob - Ø41mm - Ford tractor
€ 4,70
Add to basket
Gear knob Hi/Low - Ø33mm - Ford Tractor
€ 4,70
Add to basket
Gear lever cover gasket - Ford Tractor
€ 2,70
Add to basket
Gear levers with cover - Ford tractor
€ 133,00
Add to basket
Gearbox - Rear axle gasket set - Ford Tractor
€ 21,30
Add to basket
Gearbox cover gasket Fits: Ford 2000, 2100, 2120, 2150, 2300, 2310, 2600, 3000, 3055, 3330, 335, 3400, 3500, 3550, 3600, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500 OEM ref. Case IH / International Harvester C5NN7N057A, E6NN7N057
Gearbox cover gasket - Ford Tractor
€ 10,10
Add to basket
Grease cartridge Lubricating grease 400 grams
€ 3,40
Add to basket
Grease nipples 1/4" UNF - 1/8" BSP - assortment - MF tractor - Ford tractor - Ferguson tractor
Grease nipples - assortment
€ 29,30
Add to basket
Gyro valve - Bracket for quick coupling Fits quick coupling with Ø38mm (1/2" body)
Gyro valve - Bracket for quick coupling
€ 5,30
Add to basket
Gyro valve - Bracket for quick coupling - Double Fits quick coupling with ø38mm (1/2" body)
Gyro valve - Bracket for quick coupling - Double
€ 10,10
Add to basket
Hydraulic 1/2" quick coupling - Dust cap - Blue
Hydraulic 1/2" quick coupling - Dust cap - Blue
€ 3,00
Add to basket
Hydraulic 1/2" quick coupling - Dust cap - Red
Hydraulic 1/2" quick coupling - Dust cap - Red
€ 2,60
Add to basket
Packing set for lift cover & hydraulic cylinder Fits on: Ford 2000, 3000, 4000 Fits on: Ford 2300, 4200 Fits on: Ford 2110, 2310, 4110 OEM ref. Allis Chalmers 70932243 Case IH / International Harvester 1-6344, 117538A1, 238-6113, 83900080, 2386
Hydraulic cylinder & Lift cover - Seal kit
€ 14,80
Add to basket
Hydraulic filter - Ford tractor Type: Spin On Type: Spin On Height 176mm Outer Ø: 95mm Thread: 1-1/8 - 16 UNF-2B UNF. Please measure the old one before ordering Fits: Ford 3000, 7000 Fits: Ford 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110
SOLD OUT
Hydraulic filter - Ford tractor - Spin On - Height 176mm
€ 20,00
Show item
Hydraulic piston rod Fits: Ford 2N, 8N, 9N Fits: Fordson Dexta, Super Dexta Fits: Ford 2000, 3000, 4000 Fits: Ford 2031, 2100, 2110, 2111, 2120, 2131, 2150, 2300, 2310, 2600, 2610, 2910, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3
Hydraulic piston rod
€ 26,50
Add to basket
Hydraulic pump Motor mounted with 27 teeth Fits: Ford 2000, 3000, 4000 Fits: Ford 2600, 3600, 4100, 7600 Fits: Ford 2810, 2910, 3910, 4110, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8210 Fits: Ford 8530, 8630, 8730, 8830 P
Hydraulic pump - Ford tractor
€ 344,60
Add to basket
Hydraulic pump - Gasket - Ford tractor
€ 4,10
Add to basket
Hydraulics - Blanking plug 3/8" BSP With rubber seal D : 22mm. F 3/8" Thread size: 3/8 Thread type: BSP I: 12mm. L: 17mm
Hydraulics - Blind plug 3/8" BSP with rubber gasket
€ 4,10
Add to basket
Input shaft PTO seal Fits models with dual clutch & Live drive PTO Measurements: A: 79.38mm A: 3-1/8" B: 1-15/16" B: 49.21mm Width: 12.70mm Width: 1/2" C: 1/2" C: 12.70mm Fits on: Fordson Dexta, Super Dexta Fits on: Ford 2000, 3000, 40
Input shaft PTO seal housing - Double clutch
€ 11,40
Add to basket
Input shaft PTO oil seal Fits models with SINGLE CLUTCH Dimensions: A: 55.56mm A: 2-3/16" B: 1-1/8" B: 28.58mm Width: 12.70mm Width: 1/2" C: 1/2" C: 12.70mm Fits: Fordson Dexta, Super Dexta Fits: Ford 2000, 3000, 4000 Fits: Ford 21
Input shaft PTO seal housing - Single Coupling
€ 8,70
Add to basket
Knuckle for lift mounting - Lift control A Hole diameter: 5/8"(16.5mm) B Hole diameter: 5/8"(16.5mm) A Width: 1 7/8"(48mm) B Width: 1 7/8"(48mm) Fits: TE20 series, FE35, MF35, MF135, MF165-MF188 Fits: MF230, MF240, MF250, MF255, MF265, MF275,
Knob for lift suspension - Lift control
€ 6,50
Add to basket
Knob peg - MF135 - John Deere R63737 Massey Ferguson 377111X1
Knoleds dowel -1 pc. - Ø16mm
€ 4,70
Add to basket
Knoledspløk - 4 pcs.
€ 9,80
Add to basket
Lift arm ball locking split pin
€ 3,40
Add to basket
Lift arm cat 1/1 - 810mm - Right Length: 810 mm Height: 76mm Width: 13mm 3-hole Fits: Ford 2000, 3000 Fits: Ford 2610, 2910, 3610 Fits: Ford 2600, 3600 OEM ref. S.61415, S61415, D0NN555D
Lift arm Cat 1/1 - 810mm - Right
€ 107,00
Add to basket
Quality lift arm Suitable for right and left side. Length 880mm Width 89mm Thickness 18mm Hole diameter balls: Ø: ¾” - 28mm Fits: Ford 3000, 4000 Fits: Ford 2810, 2910, 3055, 3550, 3900, 3910, 3930, 4100, 4130, 4200, 4330, 4340, 4400, 4410
Lift arm cat 2/2 - 880 mm
€ 160,00
Add to basket
Lift arm bracket - Lift arm suspension - Castle nut 5/8" Quantity: 2 pcs. (fig. 13 in the picture) Thread: 5/8 UNF Fits: TE20 series, FE35, MF35, MF135 Fits: Fordson Dexta, Super Dexta Fits: Ford 2000, 3000, 4000 OEM ref. Ford / New Holland 81419
Lift arm suspension - mount on body - castle nut 5/8" - 2 pcs.
€ 3,80
Add to basket
Lift shaft - bushing Fits on right & left side Dimensions: 60.2 x 50.8 x 35.8mm Fits: FE35, MF35, MF65 Fits: Fordson Dexta, Super Dexta Fits: Ford 2000, 3000, 4000 OEM ref. Ford / New Holland 86534029, 9N531C Massey Ferguson 180896M1, 1
Lift axle - bushing - 2 pcs.
€ 12,80
Add to basket
Lift control 560/ 660mm - Ford 3000
€ 105,60
Add to basket
Previous page    Page 1 / 2